| BMP ID: |
2487 |
| Title: |
Adequate blowout prevention equipment must be used on all well servicing operations. |
| Text: |
"(5) A. BOPE for well servicing operations. Adequate blowout prevention equipment shall be used on all well servicing operations. B. Backup stabbing valves shall be required on well servicing operations during reverse circulation. Valves shall be pressure tested before each well servicing operation using both low-pressure air and high-pressure fluid." |
| Source Publication Name: |
Colorado Oil and Gas Conservation Commission, Practice and Procedure, 2 CCR 404-1, Final Draft Rules 11 07 08 |
| Citation Section: |
603. DRILLING AND WELL SERVICING OPERATIONS AND HIGH DENSITY AREA RULES |
| Citation Page: |
603(e)(5) |
| Supplemental Documents: |
|
| Usage Type: |
Required |
| Timing: |
• Drilling
• Production / Operation / Maintenance
|
| Oil / Gas Field: |
|
| Surface Ownership: |
• Federal
• State
• Private
|
| Mineral Ownership: |
• Federal
• State
• Private
|
| Primary Contact: |
No Contact Listed |
| Phone: | |
|
Alt. Phone: | |
| Fax: | |
|
E-mail: | |
|
| Alternate Contact: |
|
| |
| Categories: |
Other
|
| Location: |
Colorado |
| Species: |
|
| Vegetation Types: |
|
| General Comments: |
|
| Cost-Benefit Analysis: |
|
| BMP Efficacy: |
|
| Date Entered: |
2009-02-25 13:15 UTC |
| Last Updated: |
2009-02-25 13:15 UTC |
