University of Colorado at Boulder
BMP of Oil and Gas Development

Browse BMPs

You are viewing BMP records related to the Brighton Memorandum of Understanding, (Draft Model) publication.

BMP ID Short Title Text of BMP
9814 Align access roads "11. Visual Impacts and aesthetics. . . . To the maximum extent practicable, Operator shall comply with the following aesthetic provisions . . . f. ...
9835 Align pipelines with established roads "16. Flow lines. . . . To the maximum extent reasonably practicable, any newly constructed or substantially modified flow lines on site shall meet ...
9829 Avoid dust suppression activities within 300 feet of any waterbody "14. Fugitive Dust suppression. . . . The operator will avoid dust suppression activities within three hundred (300) feet of the high water mark of ...
9773 Bury temporary water lines at crossings "3. Water Supply and Quality. . . . If necessary, Operator will bury temporary water lines at existing driveway and gravel road crossings, or utilize ...
9811 Consult when clearing trees and vegetation "11. Visual Impacts and aesthetics. . . . To the maximum extent practicable, Operator shall comply with the following aesthetic provisions . . . c. ...
9768 Containment berm inspection "2. Containment berms. . . . All berms and containment devices shall be inspected by the Operator at regular intervals and maintained in good ...
9767 Containment berms "2. Containment berms. The operator shall utilize steel-rim berms around tanks and separators at well sites with sufficient capacity to contain 1.5 ...
9787 Copies of water test results provided "9. Water Quality Monitoring Plan. . . . c. Copies of all water test results shall be provided to the City and landowner within thirty (30) days of ...
9738 Emergency or Freshwater Pits "1. Pits. Operator's Pit Practices within the City. a. . . . emergency or freshwater pits may be allowed if approved by the Colorado Oil and Gas ...
9843 Equipment removal for multi-well pads "18. Removal of equipment. . . . It is understood that drilling and completion equipment necessary for multi-well pads may remain on location, so ...
9841 Equipment removed from the site "18. Removal of equipment. All equipment used for drilling, completion, or re-completion and maintenance of the facility shall be removed from the ...
9823 Exhaust vented away from occupied buildings "13. Air Quality Mitigations. . . . b. To the extent practicable, exhaust from all engines, motors, coolers, and other mechanized equipment shall be ...
9820 First attempt to repair a gas leak "13. Air Quality Mitigations. a. In addition to the requirements under Colorado Air Quality Control Program, Title 25, Section 7, C.R.S., oil and gas ...
9806 Floodplain disturbance "10. Floodplain. Any disturbance within a 100-year floodplain will be allowed if the Operator has obtained a Floodplain Development Permit from the ...
9832 Flow lines "16. Flow lines. Any newly constructed or substantially modified flow lines on site shall be constructed and operated under the provisions of the ...
9783 Hydraulic fracturing chemicals may remain on location during drilling "8. Chemical storage. . . . It is understood that hydraulic fracturing chemicals and flowback from hydraulic fracturing on multi-well pads may remain ...
9821 If a gas leak repair is not possible within 24 hours "13. Air Quality Mitigations. a. In addition to the requirements under Colorado Air Quality Control Program, Title 25, Section 7, C.R.S., oil and gas ...
9822 If shutting down a well will not stop a gas leak "13. Air Quality Mitigations. a. In addition to the requirements under Colorado Air Quality Control Program, Title 25, Section 7, C.R.S., oil and ...
9831 Keep ground free of flammable material "15. Flammable material. All ground within twenty five (25) feet of any tank, or other structure containing flammable or combustible materials shall ...
9815 Landscaping practices "11. Visual Impacts and Aesthetics. . . . In Urban Mitigation Areas and Useable Open Spaces, one or more of the following landscaping practices may ...
Page:<< Previous|1234|Next >>   Goto to page: